Technical datasheet
DIN 71802Angled Ball Joints
Steel
Steel / Stainless Steel, with Threaded Ball Shank and Rivet Ball Shank
|
Catalogue
|
d1 H9/h9
|
d2
|
d3
|
l2
|
d4 h11
|
d5
|
d6
|
l1
|
l3
|
l4
|
t
|
A/F
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DIN 71802-8-M5-C
|
8
|
M 5
|
M 5
|
-
|
-
|
8
|
12.8
|
10
|
8.5
|
22
|
10.5
|
7
|
|
DIN 71802-8-M5L-C
|
8
|
M 5L
|
M 5
|
-
|
-
|
8
|
12.8
|
10
|
8.5
|
22
|
10.5
|
7
|
|
DIN 71802-10-M6-C
|
10
|
M 6
|
M 6
|
-
|
-
|
10
|
14.8
|
12.5
|
10.5
|
25
|
11.5
|
8
|
|
DIN 71802-10-M6L-C
|
10
|
M 6L
|
M 6
|
-
|
-
|
10
|
14.8
|
12.5
|
10.5
|
25
|
11.5
|
8
|
|
DIN 71802-13-M8-C
|
13
|
M 8
|
M 8
|
-
|
-
|
13
|
19.3
|
16.5
|
12
|
30
|
14
|
11
|
|
DIN 71802-13-M8L-C
|
13
|
M 8L
|
M 8
|
-
|
-
|
13
|
19.3
|
16.5
|
12
|
30
|
14
|
11
|
|
DIN 71802-16-M10-C
|
16
|
M 10
|
M 10
|
-
|
-
|
16
|
24
|
20
|
15
|
35
|
15.5
|
13
|
|
DIN 71802-16-M10L-C
|
16
|
M 10L
|
M 10
|
-
|
-
|
16
|
24
|
20
|
15
|
35
|
15.5
|
13
|
|
DIN 71802-16-M12-C
|
16
|
M 12
|
M 12
|
-
|
-
|
16
|
24
|
20
|
15
|
35
|
15.5
|
13
|
|
DIN 71802-16-M12L-C
|
16
|
M 12L
|
M 12
|
-
|
-
|
16
|
24
|
20
|
15
|
35
|
15.5
|
13
|
|
DIN 71802-19-M14F-C
|
19
|
M 14F = M 14x1.5
|
M 14 x 1.5
|
-
|
-
|
22
|
30
|
28
|
19.5
|
45
|
21.5
|
16
|
|
DIN 71802-19-M14FL-C
|
19
|
M 14 FL = M 14x1.5 L
|
M 14 x 1.5
|
-
|
-
|
22
|
30
|
28
|
19.5
|
45
|
21.5
|
16
|
Version in Steel
Types
- Type CS: with threaded ball shank with safety catch
- Type C: with threaded ball shank without safety catch
- Type BS: with rivet ball shank, with safety catch
- Type B: with rivet ball shank, without safety catch
Steel
- Tensile strength class 5
- zinc plated, colorless passivated
Ball
Steel
- hardened
- ball seat lubricated
Version in Stainless Steel
Types
- Type CSN: with threaded ball shank, with safety catch
- Type CN: with threaded ball shank, without safety catch
Stainless Steel AISI 303
Ball
Stainless Steel
- not hardened
- ball seat greased
Angled ball joints DIN 71802 consist of a ball socket DIN 71805 and a ball shank DIN 71803.
The angle of rotation for the type with safety catch (Types CS, BS, CSN) ist 15°, without safety catch (Types C, B, CN) is 18°.
For assembly the ball ist pushed through the circlip which acts as a retainer. Should the retaining force (see pull-off force in the table above) between ball and socket not be sufficient, this can be increased by adding a safety catch, which can easily be fitted.
To protect the angled ball point, a dust cap GN 710 can be added.
The hexagon nut is part of the angled ball joints.
- smooth specification (Ball seat with play)
- Ball studs DIN 71803
- Ball sockets DIN 71805
- Axial joints (ball socket and ball shank in one axis)
- Dust caps GN 710
Related products
